Part Number: AQ7275-735032
YOKOGAWA AQ7275 OTDR 37/35dB 1310/1550nm
Introduction
The AQ7275 is one of the best selling OTDRs in the world. Model lineup has been expanded to a total of 9 models to choose from with a dynamic range of up to 45dB . Wavelength capability spans from 850nm (MMF) to 1650nm (SMF). An impressive 0.8m event dead zone makes this model an excellent choice for FTTH and metro, core networks.
Enhancements include a PON option allowing accurate event analysis after a 1x32 splitter with significantly reduced undershoot effects. Also unique to the industry is a built-in section of launch fiber to eliminate the need for a separate launch box.
Latest standard features includes the convenient capability to display a fiber connector inspection probe using one of the unit's standard USB I/O ports.
Features
Wide Range of Modules Available
Enhanced support of FTTH to Metro, Core Network
High Dynamic Range (45dB)
Short Dead Zone (0.8 m)
Optional built in Dummy Fiber
Applications
Stabilized Light Source
Visible Light Source
Built-in Dummy Fiber
Optical Power Monitor
Angled-PC Connector
Printer/LAN
Meets a broad range of measurement needs from FTTH to Metro, Core network.
Family Comparison
| Model | 735032 | 735033 |
|---|---|---|
| Wavelength *1 | 1310/1550±25 nm | |
| Applicable fiber | SM (ITU-T G.652) | |
| Distance range | 500m, 1km, 2km, 5km, 10km, 20km, 50km, 100km, 200km, 300km, 400km, 512km | |
| Pulse width *2 | 3ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1µs, 2µs, 5µs, 10µs, 20µs | |
| Dynamic range (typ) | 37/35 dB *4 | 40/38 *4 |
| Event dead zone (typ) *3 | 0.75 m *5 | |
| Attenuation dead zone (typ)*3 | 7/8 m *6 | |
| Descriptions | Standard model for installation and maintenance of FTTH | Standard model for installation and maintenance of Metro and Access network |
Note
*1 Pulse width of 1 µs
*2 Pulse width setting range depends on the distance range
*3 Pulse light output power at 1625 nm and 1650nm, 15dBm or less, built-in 1310/1550nm cut filter
*4 SNR:1, pulse width: 20 µs, distance range: 200 km, sampling resolution: 8 m, measurement time: 3 minutes. When built-in dummy fi ber and angled-PC connector are used, each dynamic range
decreases by 0.5 dB. Guaranty value [dB]; 30 (735031), 34/32 (735032), 40/38 (735033), 43/41 (735034), 34/30/32 (735035), 40/38/33 (735036), 40/38/30 (735037), 40/38/36 (735038), [SM]
40/38 [GI50/125] 21.5/23 [GI62.5/125] 22.5/24 (735041)
*5 Pulse width of 3 ns, return loss of 45 dB or more at a point 1.5 dB below the peak value (not saturated). Guaranty value is 0.8m
*6 Pulse width of 10 ns and return loss of 45 dB or more at a point where the backscatter level is within ±0.5 dB of the normal value
Note: Specifi cations without any special remarks are assured at 23°C±2°C
F-tone is specializing in supplying fiber optic components and network equipment, and we are trying to complete this system. For the OTDR, we provide one year warranty for each domestic and foreign brand product. If you have any problems or special requirement of this YOKOGAWA AQ7275 OTDR 37/35dB 1310/1550nm, please feel free to contact us. We will try our best to provide you the best service.
| Common Specification | |||
|---|---|---|---|
| Horizontal Axis Parameters | |||
| Sampling resolution | 5 cm, 10 cm, 20 cm, 50 cm, 1 m, 2 m, 4 m, 8 m, 16 m, 32 m | ||
| Readout resolution | 1 cm (Min.) | ||
| Number of sampled data | Up to 50,000 points | ||
| Group refractive index | 1.30000 to 1.79999 (in 0.00001 steps) | ||
| Unit of distance | km, kf, or miles | ||
| Distance measurement accuracy | Sum of the following 3 errors | ||
| Offset error: ±1 m | |||
| Scale error: Measurement distance × 2 ×10-5 | |||
| Sampling error: ±1 sampling resolution | |||
| Excluding IOR uncertainty | |||
| Vertical Axis Parameters | |||
| Vertical axis scale | 0.2 dB/div, 0.5 dB/div, 1 dB/div,2 dB/div, 5 dB/div, 7.5 dB/div | ||
| Readout resolution | 0.001 dB (Min.) | ||
| Loss measurement accuracy | ±0.05 dB/dB | ||
| * When the measuring loss is 1dB or less, the accuracy is within ±0.05dB | |||
| OTDR Measurement Function | |||
| Distance measurement | Displays up to eight digits of the relative one-way distance between two arbitrary points on the trace | ||
| Loss measurement | Displays one-way loss in steps o, f 0.001 dB to a maximum of 5 digits. Displays the one-way loss, loss per unit length, and splice loss between any two given points on the waveform | ||
| Return loss measurement | Measures return loss and total return loss of a fiber cable or between | ||
| Scheduling function | Performs measurements and saves results onto a USD storage in a user defined frame and interval automatically. | ||
| OTDR Analysis Functions | |||
| Analysis functions | Multi trace analysis, 2 way trace analysis, differential trace analysis, section analysis | ||
| Internal Memory | |||
| Memory capacity | 1000 waveforms or more | ||
| Can store measured waveforms, and measurement conditions | |||
| Display | |||
| Display | 8.4-inch color TFT LCD | ||
| Total number of pixels | 640 (horizontal) * 480 (vertical) | ||
| * The LCD may contain some pixels that are always ON or OFF (0.002% or fewer of all displayed pixels including RGB,) but this is not indicative of a general malfunction. | |||
| External Interface | |||
| USB | USB1.1 Type A and Type B, one each | ||
| Type A: For external memory or external printer | |||
| Type B: For connecting to an externall PC for remote control or access to the OTDR's internal memory |
|||
| File formats | Read: SOR, TRD, TRB, SET (AQ7270/75) | ||
| Write: SOR (Telcordia), SET, CSV, BMP, JPG, PNG | |||
| General Specification: | |||
| Laser safety standards | Class 1 M (IEC60825-1:1993+A2:2001) | ||
| Safety standard | EN61010-1 | ||
| Emission | EN61326-1 Class A | ||
| EN55011 Class A Group 1 | |||
| Immunity | EN61326-1 Table 2 | ||
| Operating environment | Temperature 0 to 45°C (0 to 35°C when charging the battery) | ||
| Humidity 85% RH or less(no condensation) | |||
| Humidity | 85% RH or less (no condensation) | ||
| Storage temperature | -20 to 60°C | ||
| Battery | Operation time 6 hours(18 hours with external large capacity battery) | ||
| Recharge time 5 hours *2 | |||
| Rated supply voltage | 100 to 240 VAC | ||
| Rated supply frequency | 50 to 60 Hz | ||
| Power consumption | Max 70 W (when battery charging, and optional printer) | ||
| Dimensions | (W) 287 * (H) 197 * (D) 85 mm (excluding projections or options) | ||
| Weight | Approx. 2.8 kg (exincluding options) | ||
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.