1 0

    Brocade E1MG-100FX-T Compatible F-tone 100BASE-T SFP (Copper,100m,RJ-45)

    Brocade E1MG-100FX-T Compatible F-tone 100BASE-T SFP (Copper,100m,RJ-45)

    Model
    View full details

    Description

    Brocade E1MG-100FX-T Compatible F-tone FT-01-TC 100BASE-T SFP Transceiver Module(Copper, 100m, RJ-45)

    The Brocade E1MG-100FX-T Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 100BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 100Mbps data-rate up to 100 meters reach over unshielded twisted-pair category 5 cable（BER<10-12）. The module supports100 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

    Attribute Value Attribute Value
    F-tone Part Number FT-01-TC Brocade Part Number E1MG-100FX-T
    Form Factor SFP Max Data Rate 100Mbps
    Media Cat 5/Cat 6/Cat 6a Max Cable Distance 100m
    Connector RJ-45 DOM Support No
    Commercial Temperature Range 0 to 70°C Protocols MSA Compliant

    Features

    • F-tone 100BASE Connectivity for Data Centers
    • The F-tone 100BASE SFP transceivers deliver energy-efficient and cost-effective performance for Gigabit Ethernet applications.With low power consumption and stable signal transmission, they provide a reliable solution for access and aggregation layers.Ideal for enterprises and data centers seeking efficient network upgrades with minimal operational cost.
    • Certified through host-device testing for dependable interoperability
    • Each transceiver undergoes strict quality assurance and compatibility testing within the intended switch environment, ensuring not only flawless operation but also long-term stability and reliability in demanding network applications.
    • Rigorous Testing Ensures Reliable Performance
    • Every F-tone optical module undergoes a thorough qualification process with state-of-the-art equipment, guaranteeing superior quality and dependable operation.

    Compatible:

    • Cisco
    • F-tone
    • Brocade
    • Dell
    • Extreme
    • H3C
    • HPE H3C
    • HW

    Competitor P/N:

    E1MG-100FX-T | 100m

    Contact & Support

    7×24 Phone：+86 177 6116 3895
    Email：una@f-tone.com
    Whatsapp：+86 177 6116 3895
    VK ID：qsfposfp
    Wechat ID：F-tone027
    support：support@f-tone.com
    Facebook：william@f-tone.com
    Skype ID：william@f-tone.com
    English Site：https://www.qsfposfp.com
    Russian Site：https://www.qsfposfp.ru
    Chinese Site：https://www.f-tone.com
    Address：F-tone Building, Digital Economy Industrial Park, Tianfu New Area, Sichuan, China

    Important Notice

    Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

    HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

    View all

    HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

    View all

    Power and Wavelength Testing

    Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

    Power and Wavelength Testing

    Traffic Testing

    Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

    Traffic Testing

    Optical Performance Testing

    Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

    Optical Performance Testing

    End Face Testing

    Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

    End Face Testing

    Various Switch Tests

    Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

    Various Switch Tests

    About F-tone Networks

    F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
    F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

    about usContact Us