The 100G DWDM PAM4 transceiver supports to multiple 100G links up to 80km using TDCM and EDFA over single-mode fiber (SMF) via an CS connector. PAM4 modulation technology allows for DWDM connectivity in a QSFP28 form factor on the 100G ITU DWDM wavelength grid. This transceiver is compliant with IEEE 802.3bm, QSFP28 MSA, SFF-8636 and SFF-8024 standards. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters. Featuring low power consumption, high speed and long transmission distance, this transceiver is ideal for DCI, 100G Ethernet Metro-Access over DWDM, Campus and Enterprise Links, etc.
Cisco Compatible 100G DWDM QSFP28 Optical Transceiver Module (SMF, 80km, CS, DOM)
|
Part Number |
DW2-QSFP100G80-2324 |
Vendor Name |
F-tone Networks |
|
Form Factor |
QSFP28 |
Data Rate |
100Gbps (2x50G) |
|
Wavelength |
1558.98nm,1558.17nm |
Distance |
80km with EDFA and TDCM |
|
Connector |
Duplex CS/UPC |
Cable Type |
SMF |
|
Transmitter |
EML |
Receiver Type |
PIN |
|
TX Power(100G) |
-1~4dBm |
Minimum Receiver Power |
-13dBm |
|
Power Consumption |
7W |
Receiver overload |
≥5dBm |
|
Modulation Format |
PAM4 |
Bit Error Ratio (BER) |
6dB (Typ.) |
|
Protocols |
IEEE 802.3bm, QSFP28 MSA, SFF-8636, SFF-8024 |
Warranty |
3 Years |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.