Cisco C42 DWDM-SFP10G-43.73 Compatible 10G DWDM SFP+ Optical Transceiver Module (SMF, 1543.73nm, 80km, LC, DDM)
The Cisco C42 DWDM-SFP10G-43.73 compatible DWDM-SFP10G-80 series 10G SFP+ transceiver module is equipped with an LC duplex connector, reaching a link up to 80km over G.652/655 single-mode fiber (SMF). This 10G DWDM SFP+ transceiver operates at a nominal DWDM wavelength at 1543.73nm as specified by the ITU-T, designed for DWDM networking equipment connectivity.
F-tone manufactured 10GBASE-DWDM SFP+ module is compliant with the SFF-8431 MSA and SFF8432 MSA specifications. Besides, the small form-factor pluggable plus (SFP plus) optic has been tested on host devices to ensure full compatibility with Cisco equipment, such as Ethernet switches, enterprise routers, and server network interface cards (NICs). The third-party DWDM 10G SFP module is an ideal substitute to the Cisco DWDM SFP+ 10G transceiver at an affordable providing a cost-effective compatible solution for high-performance 10G connectivity.
DWDM 10G SFP+ optics cater to 10 Gigabit Ethernet (10GbE) optical fiber connections, ideal to be deployed for Long Haul DWDM Solution in metropolitan access and core networks.
| Model Name | C42 DWDM-SFP10G-43.73 | Vendor Name | F-tone |
| Form Factor | SFP+ | Data Rate | 9.95 to 11.3Gb/s bit rates |
| Wavelength | 1543.73nm | Distance | 80km@G.652 |
| Connector | LC Duplex | Cable Type | OS2 SMF |
| Transmitter Type | EML | Receiver Type | APD |
| TX Power | 0~+5dBm | Receiver Sensitivity | <-24dBm |
| Power Consumption | <1.5W | Modulation Format | NRZ |
| DDM | Support | Bit Error Ratio (BER) | 1E-12 |
| Protocols | IEEE 802.3ae, SFF-8472 | Warranty | 5 Years |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Contact Information
| 7×24 Phone | +86 177 6116 3895 |
| una@f-tone.com | |
| +86 177 6116 3895 | |
| VK ID | qsfposfp |
| Wechat ID | F-tone027 |
| support | support@f-tone.com |
| william@f-tone.com | |
| Skype ID | william@f-tone.com |
| Russian Site | https://www.qsfposfp.ru |
| English Site | https://www.qsfposfp.com |
| Chinese Site | https://www.f-tone.com |
| Address | F-tone Building, Digital Economy Industrial Park, Tianfu New Area, Sichuan, China |
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.