Skip to product information
1 of 1

Cisco Compatible 50GBASE-ZR2 QSFP28 1310nm 80km Duplex LC/UPC SMF Transceiver Module

Cisco Compatible 50GBASE-ZR2 QSFP28 1310nm 80km Duplex LC/UPC SMF Transceiver Module

View full details

Part Number: QSFP-ZR2-50G

Cisco Compatible 50GBASE-ZR2 QSFP28 Optical Transceiver Module (SMF, 1310nm, 80km, Duplex LC, DOM)

 

 

Cisco Compatible 50GBASE-ZR2 QSFP28 is a high performance transceiver that supports up to 80km link lengths over OS2 SMF. Digital Diagnostics functions are available via a 2-wire serial interface. The two transmitters are cooled 1310nm LAN-WDM lasers generating two optical 25Gbps output signals, which are multiplexed together at the optical output port. The two receivers are PIN Photodiodes which detect (after optical de-multiplexing) 2× 25Gbps optical input signals.
This transceiver is compliant with QSFP28 MSA, SFF-8661, SFF-8679 and SFF-8636 standards. It is suitable for 50GBase Ethernet applications.
Note: The F-tone P/N is changed from QSFP28-ZR2-50G to QSFP-ZR2-50G, but the product is the same. Only the F-tone P/N has been changed.


Specifications
Parameter Value Parameter Value
Part Number QSFP-ZR2-50G Vendor Name FS
Form Factor QSFP28 Max Data Rate 53.125 Gbps
Wavelength 1310nm Max Cable Distance 80 km
Connector Duplex LC Media SMF
Transmitter Type EML Receiver Type PIN
TX Power 2 ~ 6.5 dBm Receiver Sensitivity < -28 dBm
Power Budget 30 dB Receiver Overload 4.5 dBm
Power Consumption ≤ 6 W Extinction Ratio > 8 dB
DDM/DOM Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
CDR (Clock and Data Recovery) TX & RX Built-in CDR FEC Function Support KP4 FEC
Protocols IEEE 802.3cd, SFF-8679, SFF-8661 Rev 2.5, SFF-8636 Rev 2.10a Warranty 5 Years

This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.