The 400GBASE-PLR4 Module, MTP/MPO-12/APC connector, up to 10km over parallel single-mode fiber. It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standards.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP-LR-100G.
Part Number: QDD-4X100G-LR-S
Cisco QDD-4X100G-LR-S Compatible 400GBASE-PLR4 QSFP-DD PAM4 Transceiver Module (SMF, 1310nm, 10Km, MTP/MPO-12/APC, DOM)
Specifications
| Cisco Compatible | QDD-4X100G-LR-S | Vendor Name | F-tone |
|---|---|---|---|
| Form Factor | QSFP-DD | Max. Data Rate | 425Gbps (4x 106.25Gbps) |
| Wavelength | 1310nm | Max. Cable Distance | 10km |
| Connector | MPO-12/APC | Media | SMF |
| Transmitter Type | EML | Receiver Type | PIN |
| TX Power | -1.9~4.8dBm | Minimum Receiver Power | -8.2dBm |
| Power Budget | 6.3dB | Receiver Overload | 4.8dBm |
| Max. Power Consumption | 9W | Extinction Ratio | 3.5dB |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 8×50G-PAM4 | Modulation (Optical) | 4×100G-PAM4 |
| CDR (Clock and Data Recovery) | TX & RX Built-in DSP | Host FEC | Supported |
| Protocols | QSFP-DD MSA HW Rev 5.1, QSFP-DD, CMIS Rev 5.0, IEEE 802.3cu, IEEE 802.3bs | Warranty | 5 Years |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.