1 2

Cisco SFP-OC3-SR Compatible 155Mbps SFP Industrial Module - F-tone

Cisco SFP-OC3-SR Compatible 155Mbps SFP Industrial Module - F-tone

View full details

Transceivers Type

SFP Optical Transceiver

Compatible

200+ Vendors

Specifications

Cisco SFP-OC3-SR Compatible 155Mbps SFP Industrial Transceiver Module (SMF, 1310nm, 2km, LC, DOM)

 

The Cisco SFP-OC3-SR is a high-performance, small form factor pluggable (SFP) transceiver designed for short-range applications at speeds of 155Mbps, specifically for SONET OC-3 and SDH STM-1 networks. It fully adheres to the SFP Multi-Sourcing Agreement (MSA) and is compatible with networking equipment that follows MSA standards. This 155Mbps SFP transceiver comprises several key components: the LD driver, limiting amplifier, digital diagnostic monitor, FP laser, and PIN photo-detector. Furthermore, the SFP transceiver module falls under Class 1 laser product regulations, complying with FDA/CDRH and IEC-60825 standards. The SFP-OC3-SR transceiver has undergone rigorous testing to ensure compatibility with Cisco networking equipment, making it suitable for use in SONET/SDH (POS), optical networking, and ATM applications. It serves as a cost-effective alternative to the Cisco SFP-OC3-SR OC-3/STM-1 single-mode SFP optics module while delivering the same reliable performance. This makes it an excellent choice for system integrators, distributors, and end-users seeking compatible SFP optics transceiver solutions for their network infrastructure and fiber cabling needs.

 

Part Number FT-SFP-0102D IND Vendor Name F-tone
Form Factor SFP Data Rate 155Mbps
Wavelength 1310nm Max Cable Distance 2km
Connector Duplex LC Optical Components FP 1310nm
Media SMF DOM Support Yes
TX Power -13~-8dBm Receiver Sensitivity <-30dBm
Transmitter Type CWDM EML Receiver Type PIN
Industrial Temperature Range -5 to 85°C (-23 to 185°F) Protocols IEC/EN 61000-4-2,IEC-60825, FDA 21CFR 1040.10 and 1040.11, RoHS

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

View all

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

View all

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us