Part Number: CORNING-ClearCurveOM3
Corning ClearCurve OM3 50/125 250μm Multimode Fiber
"The price above is for one kilometer length"
Corning® ClearCurve® ultra-bendable laser–optimized™ multimode optical fiber delivers the best macro-bending performance in the industry while maintaining compatibility with current optical fibers, equipment, practices and procedures. ClearCurve OM2, OM3 and OM4 multimode fiber is designed to withstand tight bends and challenging cabling routes with substantially less signal loss than conventional multimode fiber.
This new multimode optical fiber allows designers, installers and operators of enterprise networks (including local area networks, data centers and industrial networks) to use multimode optical fiber in a package that is easier to handle and install. With greater signal protection when subjected to tight bending, ClearCurve offers greater system security and reliability meaning maximized network up-time and lower associated maintenance costs.
Item Details
| ClearCurve® OM4 fiber | ClearCurve® OM3 fiber | ClearCurve® OM2 fiber | |
|---|---|---|---|
| Optimized Data Rate over Distance | 40/100Gb/s over 170 m | 40/100Gb/s over 140 m | Not included in the standard |
| 10Gb/s over 550 m | 10Gb/s over 300 m | 10Gb/s over 150 m | |
| 1Gb/s over 1100 m | 1Gb/s over 1000 m | 1Gb/s over 750 m | |
| Standards Compliance | |||
| ISO/IEC 11801 | type OM4 fiber | type OM3 fiber | type OM2 fiber |
| IEC 60793-2-10 | type A1a.3 fiber | type A1a.2 fiber | type A1a.1 fiber |
| TIA/EIA | 492AAAD | 492AAAC-B | 492AAAB-A |
| ITU | ITU G651.1 | ITU G651.1 | ITU G651.1 |
- Industry leading macro-bending performance below 10 mm radius.
- High performance minEMBc certified bandwidth to support 850nm transmission at data rates of 10Gb/s and beyond.
- Higher data aggregation in the backbone, riser and high-speed parallel interconnects (HSPIs).
- Fully backwards-compatible and ideally suited to current and future broad range of laser-based protocols and applications.
- Superior measurement technology and manufacturing control.
- Industry-leading CPC® coatings for superior micro-bend and environmental performance.
- Suitable for challenging cabling routes for its good performance of withstanding tight bends
- Meet high requirements of substantially less signal lose
Corning ClearCurve OM3 50/125/250µm Multimode Fiber
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.