Part Number: DFC-OM3P
Plenum Rated 2.0mm Duplex Fiber Optical Cable, OM3 10G Multimode
Duplex Fiber Cables consist of two fibers joined by a thin connection between the two jackets. Workstations, fiber switches and servers, fiber optic modems, and similar hardware require duplex fiber. They are used in applications where data needs to be transferred bi-directionally. One fiber transmits data one direction; the other fiber transmits data in the opposite direction,and the cable is completed with a PVC or LSZH (Low Smoke, Zero halogen, Flame-retardant) jacket
Characteristics
- Available both in single mode fiber type and multimode fiber type
- Highly flexible and lightweight for easy handling
- Scientific design with serious processing art
- Available Jacket diameters: 2.0mm, 3.0mm, and more
- Available in PVC, Riser-rated (OFNR), Plenum-Rated (OFNP), and LSZH (Low-Smoke Zero Halogen)
- The jacket is anti-corrosion, anti-water, anti-UV lights radiation, flame-retardant and harmless to environment etc
Applications
- Optical cable jumper or pigtail cable
- Indoor riser level and plenum level cable distribution
- Interconnection of instruments and communication equipments
Specifications
| Cable Code | Cable Diameter mm | Cable Weight Kg/km | TBF Diameter μm | Tensile Strength Long/Short term N | Crush Resistance Long/Short term N/100mm | Bending Radius Dynamic/Static mm | |
| PVC Jacket | LSZH Jacket | ||||||
| GJFJV-FT1 | 1.6±0.2 | 2.4 | 2.6 | 600±50 | 100/500 | 50/30 | |
| GJFJV-FT2 | 1.8±0.2 | 3.5 | 4.5 | 900±50 | 60/100 | 100/500 | 50/30 |
| GJFJV-FT3 | 2.8±0.2 | 6.0 | 7.5 | 900±50 | 60/100 | 100/500 | 50/30 |
Optical Characteristics
| 50/125μm | 62.5/125μm | G.625 | G.625 | ||
|---|---|---|---|---|---|
| Attenuation(+20℃) | @850nm | ≤3.5dB/km | ≤3.5dB/km | ||
| @1300nm | ≤1.5dB/km | ≤1.5dB/km | |||
| @1310nm | ≤0.50dB/km | ≤0.50dB/km | |||
| @1550nm | ≤0.40dB/km | ≤0.40dB/km | |||
| Bandwidth(Class A) | @850nm | ≥500MHz•km | ≥200MHz•km | ||
| @1300nm | ≥1000MHz•km | ≥600MHz•km | |||
| Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
| Cable Cut-off Wavelength λcc | ≤1260nm | ≤1450nm | |||
| Attenuation at temperature cycling △α(-20℃～+60℃) | @1300nm | ≤0.25dB/km | ≤0.25dB/km | ||
| @1550nm | ≤0.10dB/km | ≤0.15dB/km |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.