Skip to product information
1 of 1

DTS-A Distributed Optical Fiber Temperature Measurement Host

DTS-A Distributed Optical Fiber Temperature Measurement Host

View full details

DTS-A Distributed Optical Fiber Temperature Measurement Host

Description:
The Distributed Optical Fiber Temperature Sensing System (DTS) is an optical instrument that senses temperature using optical fibers as sensors. This system utilizes a single optical fiber to simultaneously perform temperature monitoring and signal transmission. It can provide accurate and continuous temperature data in real time and achieve real-time, rapid, and multi-point measurement of spatial temperature distribution over a wide range and long distance.

The DTS-A Distributed Optical Fiber Temperature Monitoring Host can implement 4/8-channel fiber polling temperature measurement. Each channel supports a distance of 10km. The host uses 62.5/125 multimode temperature-sensing optical cables and supports API acquisition of demodulated temperature data and raw signals for user secondary development. It also has a built-in web temperature monitoring management program that can achieve temperature monitoring, temperature difference monitoring, temperature failure alarm, and simultaneously configure 8 relays, which can be linked through API interfaces.

Application scenarios:
  • Temperature monitoring of power pipelines/cable trenches
  • Temperature monitoring of tunnels
  • Distributed optical fiber temperature measurement in the petroleum/petrochemical field
  • Fire monitoring
  • Temperature monitoring of belt conveyors

Product Parameter

Parameter Unit Value Remarks
Channels pcs 4 / 8 Customizable for more channels
Monitoring Distance m 10 km Max per single channel
Spatial Resolution m <1.5 m
End-of-Line Temperature Accuracy ≤±2 ±1 ℃ @ 5 km (typical)
Temperature Resolution 0.2
Measurement Time s 3
Cable Type Multimode 62.5/125 Recommended: LSZH temperature-sensing fiber (red, DTS fiber)
Fiber Connector FC/APC
Number of Relays pcs 8 Customizable
External Communication Interface RJ45 Ethernet
Alarm Rule Management Supported Configurable logical zones
Fiber Break Alarm Supported
Differential Temperature Alarm Supported
Fixed Temperature Alarm Supported
Management Software Built-in web UI Remote browser access
Secondary Development Interface HTTP and WebSocket
Data Output Temperature / raw AS & S signals
Power Supply 12 V 6.67 A With power adapter
Dimensions mm 482.6 × 359.5 × 43.5 mm
Weight kg 7 kg

 

Demodulation host indicator parameters
i5-5200U, dual gigabit network ports, 8G memory + 128G hard drive (optional parameters). Operating system: Linux.

Structural dimensions

order information
Model Description
FT-VC-DTS-A-04 4-channel DTS host
FT-VC-DTS-A-08 8-channel DTS host

 

Professor Wu from F-tone Networks was selected as one of the top 2% global scientists for four consecutive years from 2022 to 2025 (https://elsevier.digitalcommonsdata.com/datasets/btchxktzyw/6)

F-tone Networks Technical Support:

Email:una@f-tone.com

WhatsApp and WeChat: +86177 6116 3895

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.