Part Number: FT-E624T
EPON OLT with 4-PON Ports
Product introduction
FT-E624T is a follow the IEEE802.3ah and the People’s Republic of China communication industry standard (YD/T 1475-2006) OLT equipment, full CTC2.0/2.1 support, automatic discovery and compatible with all ONU vendors. Efficient EPON solutions.
PON transmission rate of FT-E624T OLT support 1.25Gbps, efficient bandwidth utilization and Ethernet service support capability to help operators to provide quality service and reliable guarantee for their users.
Up to 1:64 of optical divide ratio, mixing networking support different types of ONU, allows the operator's investment is minimised.
FT-E624T uses the advanced technology, the Ethernet service with strong function and QoS guarantees, and support SLA DBA.
The main advantage of FT-E624T
FT-E624T is a market demand for optical network equipment at present, a OLT supports 4 EPON system, has the following advantages:
By EPON: FT-E624T followed IEEE802.3ah and the people's Republic of China communication industry standard (YD/T 1475-2006).
System capacity: FT-E624T modular PON card configuration also supports 4 EPON system, can support up to 256 user terminal equipment (ONU), support for 1:64 optical divide ratio.
Connected interface: flexible design support the combination of different network interface types, according to the choice of optical or electrical network.
Equipment size: 1U equipment occupy the room space is small, less power consumption, reduce business operating costs.
Trunk optical fiber protection: FT-E624T support in the fiber failure link automatic protection switching.
High reliability, support for dual power supply.
The main characteristics of FT-E624T
Adopts point to multipoint network topology, effectively collect users dispersion of Ethernet, and convergence in the metropolitan area network node, uses GE interface to connect the upper equipment, to achieve a smooth connected with the existing network.
Dynamic bandwidth allocation mechanism (DBA) that will be more reasonable to share the 1Gbps bandwidth of all users, achieve reliable guaranteed quality of service (QoS).
Redundant interconnection is RSTP spanning tree protection functions of OLT and backbone network fast. High reliability ring network security EAPS rapid ring protection protocol 50ms.
Support IGMP multicast, effective use of broadband. Support VLAN multicast.
Support IPTV, voice and data of three heavy plays.
rich OAM function, including configuration, alarm, performance monitoring, fault isolation and security management, and support for CLI and GUI two kinds of management modes, easy to use.
Technical parameters
| Attribute | FT-E624T |
| System capacity | The highest 1:64 ratio Backplane bandwidth 32G |
| Port | 6 GE interface (2 Gigabit RJ45 ports, 2 Combo ports, 2 gigabit optical) 4 fixed EPON interface |
| PON port | Uplink and downlink symmetrical 1Gbps transmission rate PON average light power: +2dbm ~ +7dbm PON port to receive the light sensitivity: not less than -30dBm Security: the ONU authentication mechanism Network coverage radius: 30 km |
| Follow the standard | IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad The physical link static /dynamic polymerization（LACP) Ethernet – II, Ethernet-SNAP IEEE 802.3ad VLAN Stacking( Q in Q) |
| Quality of service | Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE p802.1p, CoS WRR, SP and FIFO queue scheduling algorithm Support 802.1P/DSCP priority Mark/Remark The uplink and downlink speed limit function each based on ONU Support DBA and SLA function |
| VLAN | Port based VLAN GVRP IEEE802.1Q VLAN relay QinQ, and support for flexible QinQ |
| Multicast | IGMP v1/v2/v3 IGMP Snooping The VLAN multicast, multicast function |
| Reliability | Unidirectional link detection protocol, to prevent the survival tree ring Expansion slot EPON optical module hot swap EAPS rapid ring protection function EPON light path protection |
| Network security | Limit the maximum number of users per port Port isolate Message storm control The data flow of the ACL access control function based on PON port transmission of data encryption |
| Configuration management | CLI, Web, SNMP, TELNET, cluster and other management mode. RMON V1, the 1,2,3,9 group SSHv1/v2 The software can be upgraded and bootrom upgrade by TFTP and FTP Local or server syslog log record system In English the command prompt Ping, traceroute and other network test tool Debug output debug |
| Physical property | 442mm(W) x315mm(D) x 44mm(H) Installation: the standard 19 "rack weight: 2Kg |
| Environmental requirements | Working environment: 0 ℃ ~ 55 ℃; 10% ~ 85% no condensation The storage environment: -40 ℃ ~ 80 ℃; 5% ~ 95% no condensation |
| Power supply | Input voltage: AC100 ~ 240V, 47 ~ 63Hz input frequency Dual power supply input Input current: 1A/230V Power: Max 48W |
Ordering information
| Type | Describe |
|---|---|
| FT-E624T | 4 PON OLT devices (1 CONSOLE port, 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP ports, 2 Gigabit port; support AC90-264V power supply, single power input, 19 inch standard rack, fan heat) |
| FT-E624T-DC | 4 PON OLT devices (1 CONSOLE port, 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP ports, 2 Gigabit port; support DC36~72V, single power input, 19 inch standard rack, cooling fan) |
| FT-E624T-2AC | 4 PON OLT devices (1 CONSOLE port, 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP ports, 2 Gigabit port; support AC90-264V power supply, dual power input, 19 inch standard rack, fan heat) |
| FT-E624T-2DC | 4 PON OLT devices (1 CONSOLE port, 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP ports, 2 Gigabit port; support DC36~72V, dual power input, 19 inch standard rack, cooling fan) |
| OLT-GSFP-20 | The OLT SFP module, 20km, 1.25G, TX at 1490nm, RX at the wavelength of 1310nm, SC interface |
| OLT-GSFP-20+ | The OLT SFP module, 20km, 1.25G, TX at 1490nm, RX at the wavelength of 1310nm, SC interface, support for DDMI optical power detection function |
Technical parameters
| Attribute | FT-E624T |
| System capacity | The highest 1:64 ratio Backplane bandwidth 32G |
| Port | 6 GE interface (2 Gigabit RJ45 ports, 2 Combo ports, 2 gigabit optical) 4 fixed EPON interface |
| PON port | Uplink and downlink symmetrical 1Gbps transmission rate PON average light power: +2dbm ~ +7dbm PON port to receive the light sensitivity: not less than -30dBmSecurity: the ONU authentication mechanismNetwork coverage radius: 30 km |
| Follow the standard | IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad The physical link static /dynamic polymerization（LACP) Ethernet – II, Ethernet-SNAP IEEE 802.3ad VLAN Stacking( Q in Q) |
| Quality of service | Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE p802.1p, CoS WRR, SP and FIFO queue scheduling algorithm Support 802.1P/DSCP priority Mark/Remark The uplink and downlink speed limit function each based on ONU Support DBA and SLA function |
| VLAN | Port based VLAN GVRP IEEE802.1Q VLAN relay QinQ, and support for flexible QinQ |
| Multicast | IGMP v1/v2/v3 IGMP Snooping The VLAN multicast, multicast function |
| Reliability | Unidirectional link detection protocol, to prevent the survival tree ring Expansion slot EPON optical module hot swap EAPS rapid ring protection function EPON light path protection |
| Network security | Limit the maximum number of users per port Port isolate Message storm control The data flow of the ACL access control function based on PON port transmission of data encryption |
| Configuration management | CLI, Web, SNMP, TELNET, cluster and other management mode. RMON V1, the 1,2,3,9 group SSHv1/v2 The software can be upgraded and bootrom upgrade by TFTP and FTP Local or server syslog log record system In English the command prompt Ping, traceroute and other network test tool Debug output debug |
| Physical property | 442mm(W) x315mm(D) x 44mm(H) Installation: the standard 19 "rack weight: 2Kg |
| Environmental requirements | Working environment: 0 ℃ ~ 55 ℃; 10% ~ 85% no condensation The storage environment: -40 ℃ ~ 80 ℃; 5% ~ 95% no condensation |
| Power supply | Input voltage: AC100 ~ 240V, 47 ~ 63Hz input frequency Dual power supply input Input current: 1A/230V Power: Max 48W |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.