1 0

    FT-E8608T OLT with 8-PON Ports

    FT-E8608T OLT with 8-PON Ports

    View full details

    Part Number: FT-E8608T-A

    OLT with 8-PON Ports


    FT-E8608T OLT series, which has high reliability, highly dense EPON access and robust switching and routing abilities, is a new generation of broadband and multiservice access OLT devices oriented towards the service-integrated network. Abiding by IEEE802.3ah, FT-E8608T OLT series meets relevant requirements of GEPON OLT regulated in Technical Requirements of YD/T1475-2006—EPON and China Telecom EPON Technical Requirements.

    FT-E8608T OLT(with 8 PON ports, 8 GE uplink) products , are standalone devices with high density and optional 10G uplink expansion, so they are easy for expansion and upgrade. With L2/L3/L4 functions, they support 128Gbps backplane bandwidth, static routes, RIP, OSPF and so on. Also, they support advanced functions such as QoS, bandwidth control and multicast, adding extra values to the whole network. This series can be widely applied on the networks of the carriers, EPON in the NGB upgrade of the Broadcast, TV and film system, or automatic power distribution, power-consumed information collection and PFTTH in the electric power industry.

    Key Features

    • High reliability
    • Power source can be backed up through the “1+1” mode. At the same time, VRRP, STP and LACP provide further reliability.
    • A maximum optical coupling ratio of 1:64, up to 1024 ONUs and a 20km transmission distance.
    • Supports various interface types including GE, TE and EPON.
    • Supports CTC2.0/2.1/3.0 wholly, automatically detects and works harmoniously with ONUs made by different manufacturers.
    • Supports the RFC 1213 SNMP protocol.
    • Support power source redundancy.

    Technical Indexes

    Item Attributes Specification
    Main interfaces FT-E8608T
    PON Ports 8
    GE ports 4 GE SFP slots, 4 GE TX/SFP combo ports
    10GE ports 2 (optional)
    Backplane 128Gbps
    Flash 16MB
    Memory 256MB
    MAC table 32K
    Routing table 12K
    EPON attributes Supporting IEEE 802.3ah EPON standards
    Supporting technical requirements of YD-T 1475-2006 access network based on EPON
    Supporting EPON interconnection of YD-T 1771-2008 access network
    China Telecom EPON standards—CTC2.0/2.1/3.0
    Standard OAM and expanded OAM management
    Data encryption
    1:64 optical coupling ratio
    DBA
    ONU authentication control and the report of illegal ONU registration events
    Backbone optical-fiber protection, “1+1” hand-in-hand protection, full protection, switchover delay of less than 50ms
    Software functions Standards IEEE 802.1D IEEE 802.3 IEEE 802.3u IEEE802.3ad IEEE 802.3x IEEE 802.3z IEEE802.1Q IEEE 802.1P IEEE 802.1w
    STP 802.1D(STP), 802.1w(RSTP), 802.1s(MSTP)
    IP Routing Static route, RIPv1/2, OSPF, BGPv4
    Multicast IGMP v1/2/3, IGMP Snooping
    QoS 8 queues for each port, 802.1p, ToS, port ID, DifferSev, WRR, SP, SWRR, traffic shape, VLAN-ACL-based flow classification
    ACL L2~4 ACL, IP ACL, and data filtration based on source/destination IP, layer-3 IP ID, layer-4 TCP/UDP ID, IP priority, ToS or time based ACL
    MAC Port/MAC binding, MAC filtering
    VLAN Supporting GVRP, PVLAN and VLAN Stacking (QinQ), 4K active VLANs
    Flow control HOL, half-duplex backpressure and full-duplex IEEE 802.3x
    ARP ARP proxy
    DHCP Client, Relay and Server
    Aggregation LACP and load balance
    AAA Local and RADIUS authentication
    Mirroring Port or flow based port mirroring
    Storm Control Broadcast and multicast storm control
    Reliability VRRP
    Managements Console RS-232
    Telnet Support
    SNMP v1, v2, v3
    SysLog Support
    RMON Group 1, 2, 3 and 9
    MIB Public and private MIB
    PON interface features Wavelength Downlink 1490nm; uplink 1310nm
    Rate Symmetric uplink and downlink: 1.25G
    Average irradiating power +2dbm ~ +7dbm
    Optical reception sensibility -30dBm
    Maximum optical coupling ratio 0.0861111111111111
    Physical specification Humidity 10%～90% no condensation
    Working temperature 0°C～50°C
    Power Source AC: 90~264V, 50/60 Hz
    DC: -36~-72V
    Power redundancy 1+1 backup and hot swap
    Power consumption < 100W

    Ordering Information

    Models
    FT-E8608T Standalone L3 aggregation OLT FT-E8608T(8 EPON SFP slots, 4GE SFP slots, 4 GE TX/SFP combo ports, 1 console port, 1 out-of-band management FE TX port, optional 2 10G SFP+ uplink ports, AC power supply, support dual power source)
    Power sources
    E8608T-PWR AC power source of FT-E8608T OLT (AC 90~264V, 150W)
    E8608T-PWR-DC DC power source of FT-E8608T OLT (DC -36~-72V, 150W)





    This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
    Important Notice:
    Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
    The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

    HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

    View all

    HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

    View all

    Power and Wavelength Testing

    Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

    Power and Wavelength Testing

    Traffic Testing

    Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

    Traffic Testing

    Optical Performance Testing

    Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

    Optical Performance Testing

    End Face Testing

    Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

    End Face Testing

    Various Switch Tests

    Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

    Various Switch Tests

    About F-tone Networks

    F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
    F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

    about usContact Us