1 4

FTCS-B1303-60D SFP 155M Tx1550nm Rx1310nm 60km DDM Transceiver Module

FTCS-B1303-60D SFP 155M Tx1550nm Rx1310nm 60km DDM Transceiver Module

View full details

FTCS-B1303-60D SFP 155M Tx1550nm Rx1310nm 60km DDM Transceiver Module

PRODUCT DESCRIPTION
F-tone Networksi’s FTCS-B1303-60D Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of four sections: the LD driver, the limiting amplifier, the FP laser and the PIN photo-detector. The module data link up to 40KM in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.

PRODUCT FEATURES
● Up to 155Mb/s data links
● FP laser transmitter
● PIN photo-detector
● Up to 60km on 9/125µm SMF
● Hot-pluggable SFP footprint
● BIDI LC/UPC type pluggable optical interface
● Low power dissipation
● Metal enclosure, for lower EMI
● RoHS compliant and lead-free
● Single +3.3V power supply
● Compliant with SFF-8472
● Case operating temperature
     Commercial: 0°C to +70°C
     Extended: -10°C to +80°C
     Industrial: -40°C to +85°C

APPLICATIONS
● Switch to Switch Interface
● Fast Ethernet
● Switched Backplane Applications
● Router/Server Interface
● Other Optical Links

Absolute Maximum Ratings

Parameter Symbol Min. Typ. Max. Unit Note
Storage Temperature Ts -40 85 ºC
Relative Humidity RH 5 95 %
Power Supply Voltage VCC -0.5 4 V
Signal Input Voltage -0.3 Vcc+0.3 V
Receiver Damage Threshold 5 dBm

Recommended Operating Conditions 

Parameter Symbol Min. Typ. Max. Unit Note
Case Operating Temperature Tcase 0 70 ºC BXCS-Bxx03-20
-10 80 BXCS-Bxx03-20E
-40 85 BXCS-Bxx03-20I
Power Supply Voltage VCC 3.13 3.3 3.47 V
Power Supply Current ICC 280 mA
Power Supply Noise Rejection 100 mVp-p 100Hz to 1MHz
Data Rate 155/155 Mbps TX Rate/RX Rate
Transmission Distance 60 KM
Coupled Fiber Single mode fiber 9/125um SMF

Specification of Transmitter

Parameter Symbol Min. Typ. Max. Unit Note
Average Output Power POUT -15 -7 dBm Note (1)
Extinction Ratio ER 8.2 dB
Center Wavelength λC 1290 1310 1330 nm BXCS-B1303-20xx
1530 1550 1570 BXCS-B1503-20xx
Spectrum Width (RMS) σ 3.5 nm FP Laser
Transmitter OFF Output Power POff -45 dBm
Differential Line Input Impedance RIN 90 100 110 Ohm
Output Eye Mask Compliant with G.957(class 1 laser safety) Note (2)

Note (1): Measure at 2^23-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition

Specification of Receiver

Parameter Symbol Min. Typ. Max. Unit Note
Input Optical Wavelength λIN 1530 1550 1570 nm BXCS-B1303-20xx
1290 1310 1330 BXCS-B1503-20xx
Receiver Sensitivity PIN -28 dBm Note (1)
Input Saturation Power (Overload) PSAT -8 dBm
Los Of Signal Assert PA -45 dBm
Los Of Signal De-assert   PD -29 dBm Note (2)
LOS Hysteresis   PA-PD  0.5 2 6 dB

Note (1): Measured with Light source 1550nm (1310nm), ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ. 
Note (2): When LOS de-asserted, the RX data+/- output is signal output.

Electrical Interface Characteristics

Parameter Symbol Min. Typ. Max. Unit Note
Transmitter
Total Supply Current ICC A mA Note (1)
Transmitter Disable Input-High   VDISH 2 Vcc+0.3 V
Transmitter Disable Input-Low VDISL 0 0.8 V
Transmitter Fault Input-High VTxFH 2 Vcc+0.3 V
Transmitter Fault Input-Low VTxFL 0 0.8 V
Receiver
Total Supply Current ICC B mA Note (1)
LOSS Output Voltage-High VLOSH  2 Vcc+0.3 V LVTTL
LOSS Output Voltage-Low VLOSL  0 0.8 V

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

View all

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

View all

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us