1 3

FTCS-B1503-80D SFP 155M Tx1310nm Rx1550nm 80km DDM Transceiver Module

FTCS-B1503-80D SFP 155M Tx1310nm Rx1550nm 80km DDM Transceiver Module

View full details

FTCS-B1503-80D SFP 155M Tx1310nm Rx1550nm 80km DDM Transceiver Module

Product Features
● Uncooled Laser Diode with MQW Structure
● InGaAs PIN-TIA Photodiode Receiver
● 9/125μm SMF
● BIDI Single Mode Transceiver SFP Footprint
● LC Or SC Optical Interface Are Optional
● Compliant With SFP MSA and SFF-8472
● Digital Diagnostic Monitoring Interface
● Single +3.3V Power Supply
● CML Differential Inputs and Outputs
● LVTTL Signal Detection Output
● Compliant With ITU-T G.957
● Compliant With RoHS and Lead Free
● Metal Enclosure for Lower EMI
● Operating Case Temperature:
Standard: 0 to +70°C
Extend: -20 to +85°C
Industrial: -40 to +85°C


Product Applications
● Fast Ethernet
● ATM/SONET/SDH
● Switch/Router
● Other Optical Transmission Systems

Description
The SFP transceivers are high performance, cost effective modules supporting data-rate of 155Mbps on 9/125μm SMF
The transceiver consists of three sections: a laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and DDMI control unit. All modules satisfy class I laser safety requirements.
The transceivers are compliant with the Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Performance Specifications
Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Storage Temperature Tst -40 +85 °C
Operating Temperature TO BYCS-Bxx03-20D 0 +70 °C
BYCS-Bxx03-20DE -20 +85 °C
BYCS-Bxx03-20DI -40 +85 °C
Input Voltage – GND VCC V
Power Supply Voltage VCC-VEE 0 +3.6 V

Note: Stress in excess of maximum absolute ratings can cause permanent damage to the module 

Recommended Operating Conditions

Parameter Symbol Min Typ Max Unit
Storage Temperature Tst -40 – +85 °C
Operating Case Temperature TC BYCS-Bxx03-20D 0 – +70 °C
BYCS-Bxx03-20DE -20 – +85 °C
BYCS-Bxx03-20DI -40 – +85 °C
Power Supply Voltage VCC 3.1 3.3 3.5 V
Power Supply Current ICC – – 300 mA
Data Rate DR – 155 – Mbps


Optical Specification

Transmitter
Parameter Symbol Min Typ Max Unit Note
Center Wavelength 1310 FP λC 1261 1310 1360 nm BYCS-B1303-20Dxx
1550 1501 1550 1600 BYCS-B1503-20Dxx
Spectral Width 1310nmFP Δλ – – 4 nm –
1550nm DFB 1
Average Optical Output Power Po -15 – -3 dBm 20KM
Average Optical Output Power @ 1310nm TX Po -5 0 dBm 40KM
Average Optical Output Power @ 1550nm TX Po -12 -3 dBm 40km
Extinction Ratio ER 10 – – dB –
Optical Rise/Fall Time(20%-80%) Tr/Tf – – 2.8 ns –
Output Eye Diagram Compliant with ITU-T G.957
Receiver
Parameter Symbol Min Typ Max Unit Note
Operate Wavelength 1550 – 1501 1550 1600 nm BYCS-B1303-20Dxx
1310 – 1261 1310 1360 nm BYCS-B1503-20Dxx
Receiver Sensitivity RSENS – – -32 dBm 1
Receiver Saturation PRS -3 – – dBm 1
LOS Assert – -48 – – dBm Alarm: High-level
LOS De-Assert – – – -34 dBm
LOS Hysteresis – 0.5 – 5 dBm –

 Note: 1. Minimum Sensitivity and saturation levels for a 223-1 PRBS test pattern @155Mbps.


Electrical Specification

Transmitter
Parameter Symbol Min Typ Max Unit Note
Power Supply Current ICCT – 70 150 mA 2
Input Differential Impedance ZIN 90 100 110 Ω –
Input Swing Differential Voltage VIN 500 – 2400 mV 3
TX-Disable Voltage Disable – 2.0 – VCC V –
Enable – 0 – 0.8 V –
TX-Fault Voltage Fault – 2.0 – VCC V –
Normal – 0 – 0.8 V –
Receiver
Parameter Symbol Min Typ Max Unit Note
Power Supply Current ICCR – 70 140 mA 2
Output Swing Differential Voltage VOUT 600 – 2000 mV 4
LOS Voltage High – 2.0 – VCC V –
Low – 0 – 0.8 V –

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

View all

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

View all

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us