Transceivers Type
SFP Optical Transceiver
Specifications
HPE JD062A Compatible 1000BASE-EX SFP Transceiver Module (SMF, 1310nm, 40km, LC, DOM)
HPE JD062A compatible 1000BASE-EX SFP transceiver module is equipped with an LC duplex connector, which is high-performance, cost-effective, supporting a data rate of 1.25Gbps at the link distance up to 40km over single-mode fiber (SMF). This Compatible 1000BASE-EX fiber optic transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU control unit. All F-tone manufactured 1G SFP optical transceivers satisfy class I laser safety requirements.
| Part Number |
FT-SFP-0340D |
Vendor Name |
F-tone |
| Form Factor |
SFP |
Data Rate |
1.25Gbps |
| Wavelength |
1310nm |
Distance |
40km |
| Connector |
LC Duplex |
Optical Components |
DFB 1310nm |
| Media |
SMF |
DOM Support |
Yes |
| TX Power |
-5 ~ 0dBm |
Receiver Sensitivity |
< -24dBm |
| Bit Error Ratio (BER) |
1E-12 |
Warranty |
5 Years |
| Commercial Temperature Range |
0 to 70°C (32 to 158°F) |
Protocols |
SFF-8472 MSA Compliant, IEEE 802.3ah-2004 |
Model Contrast Table
| Part Number |
FT-SFP-0301D |
FT-SFP-0302D |
FT-SFP-0310D |
FT-SFP-0320D |
FT-SFP-0340D |
| Max. Data Rate |
1.25Gbps |
1.25Gbps |
1.25Gbps |
1.25Gbps |
1.25Gbps |
| Wavelength |
850nm |
1310nm |
1310nm |
1310nm |
1310nm |
| Max Distance |
550m |
2km |
10km |
20km |
40km |
| Connector |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
| Media |
MMF |
SMF/MMF |
SMF |
SMF |
SMF |
| Operating Temperature |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
| Part Number |
FT-SFP-0340D |
FT-SFP-0380D |
FT-SFP-03100D |
FT-SFP-03120D |
FT-SFP-03150D |
| Max. Data Rate |
1.25Gbps |
1.25Gbps |
1.25Gbps |
1.25Gbps |
1.25Gbps |
| Wavelength |
1550nm |
1550nm |
1550nm |
1550nm |
1550nm |
| Max Distance |
40km |
80km |
100km |
120km |
150km |
| Connector |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
| Media |
SMF |
SMF |
SMF |
SMF |
SMF |
| Operating Temperature |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
0 to 70°C or -45 to +85℃ |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.