1 1

5W Single Stage 1310/1550nm High Power Isolator HPIS

5W Single Stage 1310/1550nm High Power Isolator HPIS

View full details

Part Number: HPIS-13/15-S-5

High Power Isolator 5W Single Stage 1310/1550nm HPIS

Features

  • Low Insertion Loss
  • High Return Loss
  • High Extinction Ratio
  • High stability
  • High Reliability

Applications

  • Optical Fiber Amplifiers
  • Testing Instrumentations
  • Fiber Sensor
  • Fiber Lasers
  • Lab Research

Picture Details

Ordering Information


Type Wavelength Fiber Power Pigtail Type Fiber Length Connector
HPIS 1=1310nm 1=SMF-28e 1=Single Stage 1=250um bare fiber 1=0.8m 0=None
HPPMIS 2=1480nm 2= PM1310 Panda Fiber 2=Dual Stage 2=900um Loose Tube S=Specify 1=FC/UPC
3=1550nm 3= PM1550 Panda Fiber 2=3mm Loose Cable 2=FC/APC
S=Specify S=Specify 3=SC/UPC
4=SC/APC
S=Specify


Parameters Unit Values
Stage Dual Single
CenterWavelength nm 1310or1550
OperatingWavelengthRang nm ±20
Typ.InsertionLossat23℃ dB 0.4 0.35
Max.InsertionLossat23℃ dB 0.55 0.5
Typ.Isolation dB 58 42
Min.Isolation dB 48 28
ExtinctionRatio dB 23
20
Max.PDLat23℃(forSMF-28eonly) dB 0.15
ReturnLoss(Input/output) dB 50
Max.OpticalPower(CW) W 1,2,3,5,10orspecify
Max.TensileLoad N 5
FiberType PM1310PandaFiber PM1550PandaFiber
SMF-28e
OperatingTemperature ℃ -5~+70
StorageTemperature ℃ -40~+85
PackageDimensions mm 5.5*35

Note: For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower.The default connector key is aligned to slow axis.


This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series

View all

HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series

View all

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Power and Wavelength Testing

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Traffic Testing

Optical Performance Testing

Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

Optical Performance Testing

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

End Face Testing

Various Switch Tests

Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.

Various Switch Tests

About F-tone Networks

F-tone Networks is now a world leader in development of optical transceivers and provide a wide range of high-speed optical solutions for optical communication networking, especially for AI, Data Center, enterprise data networking, Industry, aerospace, mining, shipbuilding, railway, metro, long haul transport networking, and mobile access networking applications
F-tone Networks invested in foundational photonics technologies and extensive product development and engineering with global presence in many area also.

about usContact Us