Transceivers Type
SFP+ Optical Transceiver
Compatible
100+ Vendors
Specifications
Juniper Networks EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper Transceiver Module (30m, RJ45)
The Juniper Networks EX-SFP-10GE-T compatible 10G copper SFP transceiver module is equipped with an RJ45 connector, reaching a link up to 30m at 10GBASE-T data rate over cat6a/cat7 Ethernet copper cabling. Besides, the 10 Gigabit copper module is backward compatible with 1GBASE-T, and intermediate rate 2.5GBASE-T, 5GBASE-T, providing multi-gigabit Ethernet deployment. F-tone manufactured 10GBASE-T SFP+ module is compliant with IEEE 802.3an, IEEE 802.3az, and SFP+ MSA. The 10G RJ45 module uses the electrical signal to transmit data, allowing an upgrade to 10G by reusing existing copper architectures. This 10G SFP+ RJ45 copper transceiver caters to 10 Gigabit Ethernet (10GbE) copper connections, delivering a cost-effective NBASE-T copper solution. It has been tested on host devices to ensure full compatibility with 10G-T ports on Juniper equipment, such as 10GBASE-T switches, enterprise routers, and server network interface cards (NICs).
Model Contrast Table
| Part Number |
FT-SFP+-T FT-SFP+-IT |
FT-SFP+-T-80 |
FT-SFP+-SR |
FT-SFP+-IR |
FT-SFP+-LR |
FT-SFP+-LH |
FT-SFP+-ER |
FT-SFP+-ZR |
FT-SFP+-ZR+ |
| Wavelength |
— |
— |
850nm |
1310nm |
1310nm |
1310nm |
1550nm |
1550nm |
1550nm |
| Max Distance |
30m@Cat6a/7 |
80m@Cat6a/7 |
300m |
2km |
10km |
20km |
40km |
80km |
100km |
| Cable Type |
Copper |
Copper |
OM3/OM4 MMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
OS2 SMF |
| Connector |
RJ45 |
RJ45 |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
LC Duplex |
| Tx Power(dBm) |
— |
— |
-6.5~-0.5 |
-8.2 ~ -0.5 |
-6.5~-0.5 |
-6~-1 |
-2~4 |
0 ~ 5 |
1 ~ 5 |
| Rx Sensitivity(dBm) |
— |
— |
-11.1 |
-12.6 |
-12.6 |
-14.4 |
-15.8 |
-24 |
-25 |
| Power Consumption |
<2.5W |
<2.5W |
<0.8W |
<0.8W |
<0.8W |
< 1W |
<1.5W |
<1.5W |
<1.5W |
| Source |
— |
— |
VCSEL + PIN |
FP + PIN |
DFB + PIN |
DFB + PIN |
EML + PIN |
EML + APD |
EML + APD |
| Operating Temperature |
0 to 70°C -40 to 85°C (IND) |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
0 to 70°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-2528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.