Part Number: PM-PLC-B-1x16
Polarization Maintaining Bare Fiber PLC Splitter 1x16 Slow Axis 250μm Bare Fiber
Polarization Maintaining Planar Light wave Circuit (PLC) splitter is a type of polarization maintaining optical power management device that is fabricated using silica optical waveguide technology. PM PLC splitter maintains polarization of input optical signal. Polarization maintaining optical splitter is an optical splitter in which the polarization of linearly polarized light waves launched into the fiber is maintained during propagation, with little or no cross−coupling of optical power between the polarization modes.
F-tone offers a large selection of polarization maintaining (PM) 1xN and 2xN optical splitter modules. PM splitters are supplied in configurations with 2, 4, 8 and 16 output channels. PM fibers are bonded to the PLC circuit chips using precision multi-fiber alignment techniques. Our splitter modules feature low insertion loss, low polarization dependence and high polarization extinction ratio over a wide wavelength range.
Features
- Wide Band and Operating Temperature
- High polarization extinction ratio
- Good Splitting Uniformity
- Low insertion loss
- The length of pigtail: 1.0m as default(also customized)
- The Axis: Slow Axis as default, Fast Axis is also available
Applications
- Splitting or Combining Output Power of Transmitters Using Polarization Maintaining Fiber
- Excellent for laboratory and industrial applications
- Aerospace and Military Application
- Fiber Sensor
- Fiber Laser
- Test Bed
Dimensions Diagram
Test Report
The test report will be provided when the products are delivered.
| Parameters | Specifications | Unit | Notes |
|---|---|---|---|
| Channel Number | 1×16 | Accord with RoHS requirement | |
| Operation Wavelength | 1310 or 1550 | nm | |
| Insertion Loss | ≤13.7 | dB | |
| Uniformity | ≤1.2 | dB | |
| PER | ≥18 | dB | |
| Return Loss | ≥50 | dB | |
| Directivity | ≥55 | dB | |
| Fiber Type | 1310nm or 1550nm PM fiber | ||
| Pigtail Type | Input: PM fiber with 0.9mm or 250μm loose tube | ||
| Output: PM fiber with 250μm loose tube | |||
| Input Length | ≥1.0 | m | |
| Output Length | ≥1.0 | m | |
| Connector | None | ||
| Tube Color | Input: white | ||
| Output: blue/orange/green/brown/gray/white/red/black | |||
| Package Dimension | 120(L) × 80(W) × 18(H) | mm | |
| Operation Temperature | -40 ~ +85 | ℃ | |
| Storage Temperature | -40 ~ +85 | ℃ |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.