S-Mini Analog Optical Receiver with Pigtail

Features 
●Supper-Mini size：31.3mm*17mm*10mm（L*W*H） 
●Low power consumption 
●Wide operating frequency from 10MHz to 12GHz 
●Flat frequency response 
●Single +5V Power supply 
●Have optical power monitoring function 
●Excellent EMI/EMC design 
●Integrated broadband amplifier （optional） 
Applications 
●WiMAX / 4G / 5G 
●Satellite communications 
●Mobile backhaul 
●GPS signal transport 
●All-Digital QAM network 
●Data and video distribution 
●Distributed antenna system
Absolute Maximum RatingsNote：Operation beyond these absolute maximum conditions may degrade device performance, lead to device failure, shorter lifetime, and will invalidate the device warranty
Typical SpecificationNote: (1) RSC and RCC are test with F-tone Networks MT04 series S-Mini optical Tx (see the below picture), RXC is test with F-tone Networks MT07 series optical Tx and the fiber is 1-meter SMF-28 fiber. (2) The ripple contains Tx and Rx.ConnectorThe user can input the known optical power Pop and detect the Vop voltage, and then calculate the approximate value of the D factor of an optical receiver by the formula Vop≈ D*Pop. In this case, the obtained D factor and Vop can be used to estimate the optical power received by the optical receiver in practical applications. 
ESD Protection
The MR03 series S-Mini optical Rx modules have electrostatics sensitivity devices, so the user has to do a good job of ESD protection when using the modules. Heat Dissipation Requirements： 
In order to ensure proper performance, heat sinking and heat removal must be provided by the user to limit maximum temperature receiver module. The bottom of the module is the preferred heat dissipation surface. 
Mechanical (unit: mm) Note: When using the module, the bottom of the module needs to be fully cooled.
Ordering Information 
Optical Receiver Note:(1) The lower start frequency such as 9kHz or DC is available upon request;(2) Other types of optical connector and fiber is available upon request; (3) Other temperature range is available upon request;(4) Amplifier only supports RSC and RCC frequency band for the time being. 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.