Part Number: Type-39
Sumitomo Type-39 Dual Heater Core Alignment Fusion Splicer
Features
- Dual Independent Splice Protection Heaters
- RoHS Compliant
- 5.6” Switchable Color Monitor for Front to Back or Back to Front Operation
- Automatic Splice and Heater Start
- Automatic Fiber Profiling Detection
- Complete Splice in Less than 40 Seconds
- Built-In LED for V-Groove Illumination
- User-Friendly Menu Selection System
- Easier to Load Fiber Holder Unit (Type-39FH)
- Splice-On Connector Compatible (Type-39FH)
- 24-Hour Technical Support via 888-SPLICER
| Specifications | |
| RoHS | Compliant (engineered to be more environmentally friendly) |
| Fiber Requirement | Silica Glass |
| Coating Diameter | 100 and 1000μm |
| Cladding Diameter | 80 to 150μm |
| Cleave Length | 8 to 16 mm (under 250μm coated fiber) 16mm (over 250μm coated fiber) |
| Typical Splice Loss, Identical Fibers | SMF: 0.02dB MMF: 0.01dB NZ-DSF: 0.04dB |
| Number of Fiber Profiles | 48 Customizable |
| Number of Pre-Installed Heater Profiles | 20 Customizable |
| Internal Splice Data Storage | 10,000 |
| Monitor Position | Multiple Position Monitor |
| Interface | USB Port for PC Interface RCA Jack for External Monitor DC input for Car Battery Operation |
| Dual Independent Heaters | Each Heater: 25 seconds 40mm sleeve 30 seconds 60mm sleeve |
| Typical Splice Time | 9 Seconds Splice Cycle Time |
| Language Selections | 16 |
| Arc Test | Automatically Compensates for Environmental Conditions |
| Menu Selection | User Friendly Menus |
| Return Loss | <-70dB |
| Proof Test | Internal 200g (Std.), 400g (Optional) |
| Attenuation Splicing | Up to 15dB in increments of 0.01db |
| Loss Estimation Process | High-resolution Direct Core Monitoring (HDCM) |
| Image Display | Dual or Single Fiber Imaging X/Y |
| Size | 150W x 150D x 150H mm (5.9W x 5.9D x 5.9H in) |
| Weight | 2.8 kg (6.2 lbs) |
| Power Requirement | Input: 100 to 240V AC; 50/60Hz, 12V DC |
| Display | 5.6 Inch TFT Low Glare High Resolution Color Monitor |
| Battery Operation | Standard: 100 Splices & Heater Cycles Extended: 200 Splices & Heater Cycles |
| Wind Protection | 30 mph (15 m/s) |
Fiber Optic Fusion splicer is a must in the process of properly joining two bare optical fibers together. For this kind of fine workmanship product, we F-tone.com provide one year warranty for each domestic and foreign brand product. If you have any problems or special requirement of the Sumitomo Type-39 Dual Heater Core Alignment Fusion Splicer, please feel free to contact us. We will try our best to provide you the best service.
Note: It has stopped production.
| Specifications | |
| RoHS | Compliant (engineered to be more environmentally friendly) |
| Fiber Requirement | Silica Glass |
| Coating Diameter | 100 and 1000μm |
| Cladding Diameter | 80 to 150μm |
| Cleave Length | 8 to 16 mm (under 250μm coated fiber) 16mm (over 250μm coated fiber) |
| Typical Splice Loss, Identical Fibers | SMF: 0.02dB MMF: 0.01dB NZ-DSF: 0.04dB |
| Number of Fiber Profiles | 48 Customizable |
| Number of Pre-Installed Heater Profiles | 20 Customizable |
| Internal Splice Data Storage | 10,000 |
| Monitor Position | Multiple Position Monitor |
| Interface | USB Port for PC Interface RCA Jack for External Monitor DC input for Car Battery Operation |
| Dual Independent Heaters | Each Heater: 25 seconds 40mm sleeve 30 seconds 60mm sleeve |
| Typical Splice Time | 9 Seconds Splice Cycle Time |
| Language Selections | 16 |
| Arc Test | Automatically Compensates for Environmental Conditions |
| Menu Selection | User Friendly Menus |
| Return Loss | <-70dB |
| Proof Test | Internal 200g (Std.), 400g (Optional) |
| Attenuation Splicing | Up to 15dB in increments of 0.01db |
| Loss Estimation Process | High-resolution Direct Core Monitoring (HDCM) |
| Image Display | Dual or Single Fiber Imaging X/Y |
| Size | 150W x 150D x 150H mm (5.9W x 5.9D x 5.9H in) |
| Weight | 2.8 kg (6.2 lbs) |
| Power Requirement | Input: 100 to 240V AC; 50/60Hz, 12V DC |
| Display | 5.6 Inch TFT Low Glare High Resolution Color Monitor |
| Battery Operation | Standard: 100 Splices & Heater Cycles Extended: 200 Splices & Heater Cycles |
| Wind Protection | 30 mph (15 m/s) |
This product belongs to F-tone Networks' optical components product line. For detailed specifications, please contact our sales team. Thank you!
Important Notice:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
HFBR-1414TZ | HFBR-2412TZ AVAGO compatible full series
HFBR-1521Z | HFBR-2521Z | AFBR-1629Z | HFBR-2629Z AVAGO compatible full series
-
HFBR-1531Z,HFBR-2531Z,HFBR-1531Z 100% Compatible with Avago ,HFBR-2531Z 100% Compatible with Avago
Regular price $0.00Regular price -
AVAGO HFBR-2521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1521ETZ Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price -
AVAGO HFBR-1528Z Compatible Domestic Alternative Optical Module
Regular price $0.00Regular price
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers' eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
Various Switch Tests
Every module is quality tested for compatibility in the multi-brand switches environment, guaranteeing flawless operations.